Structural
Framing & Carpentry in Anchorage
Structural framing, wall removal with proper headers, stairs, and finish carpentry, engineered for Anchorage snow and seismic load.
Framing is where a project either gets easy or gets expensive. Walls that are plumb and floors that are flat make every trade after them faster. Framing that is out by half an inch shows up in the cabinets, the tile, and the trim.
We do structural framing for additions and new construction, and we do the surgical version inside existing homes: removing a load-bearing wall, installing a beam, re-framing an opening, or building a stair that meets code.
Finish carpentry is the other half. Trim, built-ins, mantels, wainscot, closet systems, and the details that make a remodel look finished rather than just complete.
Scope
What the Job Covers
Structural framing
Walls, floors, roofs, and beams for additions and new builds, framed to the engineered drawings.
Load-bearing wall removal
Temporary shoring, header or beam sized by an engineer, and posts carried down to a bearing point that can take the load.
Seismic connections
Hold-downs, shear panels, and connectors per the structural drawings. Anchorage is a seismic zone and the hardware is not decorative.
Stairs
Consistent rise and run, code-compliant headroom, and railings that meet current requirements.
Finish carpentry
Base, casing, crown, wainscot, built-in shelving, mantels, and window seats.
Repairs
Sistering damaged joists, replacing rotted rim, and fixing framing that was cut through for plumbing or ductwork.
Alaska specific
Anchorage Is a Seismic Zone and the Framing Has to Say So
Southcentral Alaska sits in one of the most active seismic regions in the country. Anyone who was here in November 2018 remembers what that means. Framing and connection details here carry requirements that a builder in a low-seismic market never thinks about.
In practice that means hold-downs at shear wall ends, the specified fastener schedule on sheathing, and posts that carry a beam load down to something that can actually take it. Skipping any of that is invisible until it is not.
Snow load is the second design driver. Roof framing and any beam supporting a roof gets sized for the ground snow load in the specific area, and the Hillside and Eagle River carry more than the flats.
How it runs
From Estimate to Punch List
- 01
Structural review
We determine what is bearing and what is not. If a beam is involved, an engineer sizes it before anything is cut.
- 02
Permit and shoring
Permit pulled, temporary support set, and the load transferred before the wall comes out.
- 03
Frame
Beam or header installed, posts and footings verified, connectors installed, and the work inspected before it is covered.
- 04
Close in
Drywall, texture, and trim so the change reads as if the house was always built that way.
Questions
Framing & Carpentry FAQs
Can you remove a wall between my kitchen and living room?
+
Usually yes. The question is whether it is load bearing, and if it is, what the beam has to be and where the load goes down. We determine that first, get an engineer to size the beam, and pull a permit. Anyone who offers to do this without either is taking a risk with your house.
Do you need an engineer for every framing job?
+
No. Non-bearing walls, standard additions within prescriptive code, and most trim work do not need one. Beams, long spans, second stories, and anything changing the lateral system do.
Can you fix joists that were cut for plumbing?
+
Yes. Sistering a new member alongside the damaged one is the usual repair. If the notch is in a critical location we may need to size a repair rather than improvise, and we will tell you which one it is.
Do you do built-ins and custom trim?
+
Yes. Bookcases, benches, mudroom lockers, mantels, and wainscot, built on site to fit the actual space rather than ordered to a nominal size.
We handle framing & carpentry throughout Anchorage, Eagle River, Chugiak, Girdwood, Palmer, Wasilla.
Related
Often Done Together
Home Additions
Room additions, second stories, garage conversions, and bump-outs built onto the house you already have.
Learn more
Foundations & Excavation
Foundation repair, new foundations, site excavation, drainage correction, and seismic retrofit of older Anchorage homes.
Learn more
Basement Finishing
Turn an unfinished basement into real living space, with the egress, insulation, and moisture detailing an Alaska basement needs.
Learn more
New Home Construction
Custom homes built from the footing up, designed for a Southcentral build season and an Alaska heating season.
Learn moreReady to Talk About framing & carpentry?
Free estimates throughout Anchorage, Eagle River, and the Mat-Su.